PartsTable
Technical Data Sheet
Download PDF

476959 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

476959: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, diameter: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, material: STEEL COMP 410 OVERALL, head_style: ROUND W/WRENCH FLATS, chamfer_length: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-925-9929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
476959
NSN: 5315-00-925-9929
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
height0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
diameter0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
materialSTEEL COMP 410 OVERALL
head_styleROUND W/WRENCH FLATS
chamfer_length0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
pin_head_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
under_head_length1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
width_across_flats0.124 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
NSN5315-00-925-9929
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 476959 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.124 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
•
CHAMFER LENGTH: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.077 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.124 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
CHAMFER LENGTH0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
PIN CHAMFER ANGLE40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.077 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 476959?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 476959?
476959 is a PIN,STRAIGHT,HEADED.
What is the NSN for 476959?
476959 is cataloged in the U.S. Government catalog under NSN 5315-00-925-9929. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 476959

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.