47688: TRANSFORMER,RADIO FREQUENCY.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T. The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connec This part is cataloged in the U.S.
Government catalog under NSN 5950-00-645-2809, indicating validated use in U.S. government and defense logistics supply chains.
| body_length | 1.688 INCHES NOMINAL IN |
| coil_form_type | SOLID SINGLE COMPONENT |
| inclosure_type | OPEN |
| mounting_method | FLANGE AND UNTHREADED HOLE(S) SINGLE GROUP |
| special_features | NEXT HIGHER ASSEMBLY EMERGENCY BREAKAWAY PROBE, 7 INCH, 64191-1 IN |
| inductance_rating | 67.50 MILLIHENRIES NOMINAL SINGLE COMPONENT ALL SECONDARY |
| body_outside_diameter | 1.500 INCHES NOMINAL IN |
| reliability_indicator | NOT ESTABLISHED |
| mounting_hole_diameter | 0.156 INCHES NOMINAL SINGLE GROUP IN |
| end_item_identification | 1005-13-121-1967; PISTOL, 9 MILLIMETER, AUTOMATIC MM |
| mounting_facility_quantity | 2 SINGLE GROUP |
| terminal_type_and_quantity | 2 TAB, SOLDER LUG AND 4 WIRE LEAD |
| NSN | 5950-00-645-2809 |
| MOUNTING FACILITY QUANTITY | 2 SINGLE GROUP |
| INCLOSURE TYPE | OPEN |
| BODY OUTSIDE DIAMETER | 1.500 INCHES NOMINAL IN |
| MOUNTING METHOD | FLANGE AND UNTHREADED HOLE(S) SINGLE GROUP |
| INDUCTANCE RATING | 250.00 MILLIHENRIES NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| INDUCTANCE RATING | 67.50 MILLIHENRIES NOMINAL SINGLE COMPONENT ALL SECONDARY |
| MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL SINGLE GROUP IN |
| COIL FORM TYPE | SOLID SINGLE COMPONENT |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.750 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN |