PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 47624
47624 ✓ Verified by PartsTable
Lindy · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Cat.6A U/UTP LSZH network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10GBase-T.<br>Cat.6A cable for operating frequencies up to 500MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) Without the need for shielding. These cables are manufactured and tested according to the ISO/IEC 11801 specification.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.

A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>Available lengths: 1m, 2m, 3m This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-472-2763, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
47624
NSN: 5306-00-472-2763
FSC: 5306
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialSTEEL COMP 1022 OR STEEL COMP 1050 OVERALL
head_styleHEXAGON
head_height0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
thread_class2A A
thread_length0.685 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
washer_quantity1
thread_directionRIGHT-HAND
width_between_flats0.491 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
thread_quantity_per_inch18
NSN5306-00-472-2763
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 47624 · Lindy ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL: STEEL COMP 1022 OR STEEL COMP 1050 OVERALL
•
PRIMARY WASHER MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.567 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
MATERIALSTEEL COMP 1022 OR STEEL COMP 1050 OVERALL
PRIMARY WASHER MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
PRIMARY WASHER OUTSIDE DIAMETER0.567 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
THREAD QUANTITY PER INCH18
THREAD LENGTH0.685 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
61550Interchangeable
interchangeable cross-reference
interchangeable
1647Interchangeable
interchangeable cross-reference
interchangeable
RE61A222TYPE61550Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
6155000000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 47624?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47624?
47624 is a BOLT,ASSEMBLED WASHER manufactured by Lindy.
What parts can replace 47624?
There are 5 known substitutes for 47624: 61550, 1647, RE61A222TYPE61550 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 47624?
47624 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-472-2763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47624

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026