The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-046-5902, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
475CS24
NSN:5340-01-046-5902 FSC:5340 — Hardware, Commercial CAGE:83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
diameter
0.204 INCHES NOMINAL IN
material
STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
overall_width
0.500 INCHES NOMINAL IN
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CADMIUM BAND
material_thickness
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
loop_inside_diameter
1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
specification/standard_data
81205-BACC10DW MANUFACTURERS SPECIFICATION
cushioning_environmental_protection
HEAT
material_document_and_classification
AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end
1.467 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
NSN
5340-01-046-5902
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.467 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTION
HEAT
STYLE DESIGNATOR
SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER
0.204 INCHES NOMINAL IN
OVERALL WIDTH
0.500 INCHES NOMINAL IN
MATERIAL THICKNESS
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.467 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA
81205-BACC10DW MANUFACTURERS SPECIFICATION
SURFACE TREATMENT
CADMIUM BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 475CS24?
475CS24 is a CLAMP,LOOP.
What parts can replace 475CS24?
There are 3 known substitutes for 475CS24: TA4C44S24T, 8084C24T, S258T24. Substitute compatibility should be verified for your specific system.
What is the NSN for 475CS24?
475CS24 is cataloged in the U.S. Government catalog under NSN 5340-01-046-5902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.