PartsTable
Technical Data Sheet
Download PDF

475572 — MOLDING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

475572: MOLDING.

The MOLDING is a the manufacturer industrial component. Key specifications include height: 0.254 INCHES NOMINAL IN, diameter: 0.745 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.025 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-844-9907, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
475572
NSN: 5315-00-844-9907
NIINs: 008449907, 011930782
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 35311 — AMERICAN STANDARD INC WESTINGHOUSE AIR BRAKE CO DIV (USA)
SPECIFICATIONS
height0.254 INCHES NOMINAL IN
diameter0.745 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT CHAMFER
chamfer_length0.025 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.874 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OVERALL
under_head_length1.169 INCHES NOMINAL IN
first_hole_diameter0.170 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-844-9907
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 475572 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.025 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.169 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.170 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.874 INCHES NOMINAL IN
•
DIAMETER: 0.745 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.025 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.169 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.170 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.874 INCHES NOMINAL IN
DIAMETER0.745 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
HEIGHT0.254 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 475572?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 475572?
475572 is a MOLDING.
What is the NSN for 475572?
475572 is cataloged in the U.S. Government catalog under NSN 5315-00-844-9907. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 475572

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.