PartsTable
Technical Data Sheet
47553 ✓ Verified by PartsTable
Lindy · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Cat.6 U/FTP flat network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250MHz using the shielded version with foil shielded single pair shielding (U/FTP). Designed as flat ribbon cable for use in environments with restricted or limited installation space. Suitable for use in Gigabit Ethernet networks.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>The very fleixible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.<br>Available lengths: 0.3m, 1m, 2m, 3m, 5m, 10m.<br>Available colours: Black, This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-109-5728, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
47553
NSN: 5310-01-109-5728
FSC: 5310
CAGE: 10695 — TAYLOR-DUNN CORPORATION DBA METRO CROWN INTERNATIONAL (USA)
SPECIFICATIONS
overall_length4.000 FEET FT
special_featuresTHREAD REPAIR KIT; M10 X 1.5 COARSE, M10 X 1.25 MEDIUM THREAD SIZE
end_item_identification2350-01-305-0028; HOWITZER, MEDIUM, SELF-PROPELLED
nonsupply_items_and_quantities10 INSERTS; GROUND THREAD INTERMEDIATE (PLUG AND 2ND) TAP; INSTALLAITON/TANG BREAK TOOL; INSTRUCTIONS; CONTAINER
part_name_assigned_by_controlling_agency4 FOOT ANTENNA CABLE FT
NSN5310-01-109-5728
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 47553 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
47553Interchangeable
interchangeable cross-reference
interchangeable
2AT657Interchangeable
interchangeable cross-reference
interchangeable
35100Interchangeable
interchangeable cross-reference
interchangeable
2AT659CInterchangeable
interchangeable cross-reference
interchangeable
47553-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 47553?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47553?
47553 is a SPRING ASSEMBLY,LEAF manufactured by Lindy.
What parts can replace 47553?
There are 5 known substitutes for 47553: 47553, 2AT657, 35100 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 47553?
47553 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-109-5728. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47553