PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 47512-5
47512-5 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The TORQUE ROD,TANDEM AXLE is a the manufacturer industrial component. Key specifications include end_item_identification: KC-46 AIRCRAFT, reference_number_differentiating_characteristics: ITEM IS FAA CERTIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-074-9643, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
47512-5
NSN: 4730-00-074-9643
FSC: 4730
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
end_item_identificationKC-46 AIRCRAFT
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN4730-00-074-9643
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 47512-5 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
MATERIAL: STEEL COMP 347 OVERALL
•
NUT HEIGHT: 0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
•
LENGTH TO SHOULDER: 0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
•
SMALLEST INSIDE DIAMETER: 0.488 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
•
SEAT ANGLE: 45.00 DEGREES NOMINAL
•
NUT STYLE: TUBE COUPLING
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL COMP 347 OVERALL
NUT HEIGHT0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
LENGTH TO SHOULDER0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
SMALLEST INSIDE DIAMETER0.488 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
SEAT ANGLE45.00 DEGREES NOMINAL
NUT STYLETUBE COUPLING
NOMINAL THREAD SIZE0.750 INCHES IN
SPECIAL FEATURESUNDERCUT AT END OF INTERNAL THD 0.084 IN. MIN/0.104 IN. MAX W,0.750 IN. MIN/0.780 IN. MAX DIA,TWO LOCKWIRE HOLES @0.042 IN. MIN/0.052 IN. MAX DIA DRILLED THRU OPPOSITE CORNERS OF HEX IN
NOMINAL TUBE OUTSIDE DIAMETER0.500 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
475125Interchangeable
interchangeable cross-reference
interchangeable
1721530Interchangeable
interchangeable cross-reference
interchangeable
62015-735Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 47512-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47512-5?
47512-5 is a TORQUE ROD,TANDEM AXLE.
What parts can replace 47512-5?
There are 3 known substitutes for 47512-5: 475125, 1721530, 62015-735. Substitute compatibility should be verified for your specific system.
What is the NSN for 47512-5?
47512-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-074-9643. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47512-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026