Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
Cat.6 U/UTP flat network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br><br>Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameter (NExT, FExT, etc.) despite the lack of shielding. Designed as flat ribbon cable for use in environments with restricted or limited installation space.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.<br><br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br><br>The very flexible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-361-1978, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
MRO→MRO_GENERAL→47491
NSN:5330-00-361-1978 FSC:5330 CAGE:79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
material
STEEL COMP 316 FLOW CONTROL DEVICE
body_style
CYLINDRICAL BUSHING MOUNTED
valve_size
8.000 INCHES IN
body_length
0.688 INCHES NOMINAL IN
shaft_style
ROUND, SLOTTED
flange_shape
ROUND WITH HOLES ALL ENDS
shaft_length
0.750 INCHES NOMINAL IN
actuator_type
SINGLE SHAFT
body_diameter
0.875 INCHES NOMINAL IN
hole_diameter
0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
shaft_diameter
0.250 INCHES NOMINAL IN
connection_type
FLANGE ALL ENDS
NSN
5330-00-361-1978
COMPONENT DIAGRAM
KEY FEATURES
•
SIDE RADIUS FROM GASKET CENTER: 1.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER RADIUS: 0.406 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: CELLULOSE OVERALL
•
GASKET CENTER TO FLAT DISTANCE: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SIDE RADIUS FROM GASKET CENTER
1.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
OUTSIDE CORNER RADIUS
0.406 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS
0.031 INCHES NOMINAL IN
HOLE DIAMETER
0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN