47490 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited

Lindy · TAPERED BEARING

PRODUCT OVERVIEW

47490: CONE AND ROLLERS,TAPERED ROLLER.

Cat.6 U/UTP flat network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameter (NExT, FExT, etc.) despite the lack of shielding.

Designed as flat ribbon cable for use in environments with restricted or limited installation space. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The very fleixible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.

Available lengths: 0. This part is cataloged in the U.S. Government catalog under NSN 3110-00-682-4803, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS

47490

NSN: 3110-00-682-4803
NIINs: 006824803, 007376725, 012310416
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)

SPECIFICATIONS

material	STEEL
ring_style	HOOKED WIRE
usage_design	INTERNAL
inside_diameter	1.026 INCHES NOMINAL IN
outside_diameter	1.156 INCHES NOMINAL IN
material_diameter	0.065 INCHES NOMINAL IN
casehardening_indicator	NOT CASEHARDENED
cross-sectional_shape_style	ROUND
NSN	3110-00-682-4803

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: NORMAL ANGLE

•

CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN

•

CONE WIDTH: 1.2813 INCHES NOMINAL IN

•

STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2

•

BORE DIAMETER: 2.8125 INCHES NOMINAL IN

•

MATERIAL: STEEL OVERALL

TYPICAL APPLICATIONS

Long-term data archival and compliance retention
Offsite backup and disaster recovery
Air-gapped ransomware protection
Cold storage tier for infrequently accessed data

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	NORMAL ANGLE
CONE CORNER RADIUS	0.1400 INCHES NOMINAL IN
CONE WIDTH	1.2813 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATION	AFBMA CLASS 2
BORE DIAMETER	2.8125 INCHES NOMINAL IN
MATERIAL	STEEL OVERALL

SUBSTITUTES & CROSS-REFERENCES 7

193085Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

NW32479Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

070HB108Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ST2045Reference document

Same NSN cross-reference

Reference document — Secondary reference

0BT47490Reference document

Same NSN cross-reference

Reference document — Secondary reference

C8TZ4221AReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 47490?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 47490?

47490 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Lindy.

What parts can replace 47490?

There are 7 known substitutes for 47490: 193085, NW32479, 070HB108 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 47490?

47490 is cataloged in the U.S. Government catalog under NSN 3110-00-682-4803. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

47490 — CONE AND ROLLERS,TAPERED ROLLER

Request a Quote — 47490