PartsTable
Technical Data Sheet
Download PDF

47311X1332A — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

47311X1332A: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 55.00 MILLIMETERS NOMINAL MM, overall_width: 29.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-155-6763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
47311X1332A
NSN: 3110-00-155-6763
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter55.00 MILLIMETERS NOMINAL MM
overall_width29.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorLOADING GROOVE, NON-SEPARABLE
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
overall_outside_diameter120.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-155-6763
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 47311X1332A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 120.00 MILLIMETERS NOMINAL MM
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH29.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER120.00 MILLIMETERS NOMINAL MM
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 3
311MFGReference document
Same NSN cross-reference
Reference document — Secondary reference
86FT79Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
47311Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 47311X1332A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47311X1332A?
47311X1332A is a BEARING,BALL,ANNULAR.
What parts can replace 47311X1332A?
There are 3 known substitutes for 47311X1332A: 311MFG, 86FT79, 47311. Substitute compatibility should be verified for your specific system.
What is the NSN for 47311X1332A?
47311X1332A is cataloged in the U.S. Government catalog under NSN 3110-00-155-6763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47311X1332A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.