PartsTable
Technical Data Sheet
Download PDF

4730PL0971875 — FITTING,LUBRICATION

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

4730PL0971875: FITTING,LUBRICATION.

The FITTING,LUBRICATION is a the manufacturer industrial component. Key specifications include angle: 90.0 DEGREES, height: 0.828 INCHES NOMINAL IN, material: STEEL OVERALL, shank_length: 0.312 INCHES NOMINAL IN, special_features: SURFACE OR THROAT LOCATED BALL CHECK VALVE, style_designator: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-201-3243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4730PL0971875
NSN: 4730-00-201-3243
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
angle90.0 DEGREES
height0.828 INCHES NOMINAL IN
materialSTEEL OVERALL
shank_length0.312 INCHES NOMINAL IN
special_featuresSURFACE OR THROAT LOCATED BALL CHECK VALVE
style_designatorANGLE
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.125 INCHES IN
thread_quantity_per_inch27
assembly_clearance_radius0.469 INCHES NOMINAL IN
screw_thread_series_designatorPTF-SPL SHORT
material_document_and_classificationAISI 303/SAE 30303 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN4730-00-201-3243
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 4730PL0971875 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
ASSEMBLY CLEARANCE RADIUS: 0.469 INCHES NOMINAL IN
•
SHANK LENGTH: 0.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 303/SAE 30303 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.125 INCHES IN
•
HEIGHT: 0.828 INCHES NOMINAL IN
•
ANGLE: 90.0 DEGREES
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
ASSEMBLY CLEARANCE RADIUS0.469 INCHES NOMINAL IN
SHANK LENGTH0.312 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 303/SAE 30303 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE0.125 INCHES IN
HEIGHT0.828 INCHES NOMINAL IN
ANGLE90.0 DEGREES
SPECIAL FEATURESSURFACE OR THROAT LOCATED BALL CHECK VALVE
SCREW THREAD SERIES DESIGNATORPTF-SPL SHORT
SUBSTITUTES & CROSS-REFERENCES 8
E322-4885-38Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AS15721Reference document
Same NSN cross-reference
Reference document — Secondary reference
E108165 FIND NO 207Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
E108165 FIND NO 205Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1923SReference document
Same NSN cross-reference
Reference document — Secondary reference
AS15721-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4730PL0971875?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4730PL0971875?
4730PL0971875 is a FITTING,LUBRICATION.
What parts can replace 4730PL0971875?
There are 8 known substitutes for 4730PL0971875: E322-4885-38, AS15721, E108165 FIND NO 207 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4730PL0971875?
4730PL0971875 is cataloged in the U.S. Government catalog under NSN 4730-00-201-3243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4730PL0971875

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.