47307: STRAINER ELEMENT,SEDIMENT.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T. The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.
A robust snagless strain relief design prevents damage to the connector latch during installation and removal. This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themsel This part is cataloged in the U.S.
Government catalog under NSN 5133-00-596-1023, indicating validated use in U.S. government and defense logistics supply chains.
| material | STEEL OVERALL |
| hole_type | DRILLED |
| head_style | HEXAGON |
| point_type | CONVENTIONAL |
| head_height | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN |
| point_angle | 118.0 DEGREES NOMINAL |
| shank_style | STRAIGHT ROUND |
| flute_length | 73.0 MILLIMETERS NOMINAL MM |
| thread_class | 2A A |
| twist_length | 10.000 INCHES MINIMUM IN |
| hole_diameter | 0.062 INCHES NOMINAL IN |
| hole_quantity | 1 |
| NSN | 5133-00-596-1023 |
| SHANK SQUARE WIDTH | 0.375 INCHES NOMINAL IN |
| CUTTING END STYLE | HOLLOW CENTER SINGLE TWIST W/SCREW POINT |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM |
| OVERALL LENGTH | 14.500 INCHES MINIMUM AND 18.000 INCHES MAXIMUM IN |
| NOMINAL CUTTING DIAMETER | 0.4375 INCHES IN |
| SHANK STYLE | STRAIGHT SQUARE TANG |
| MATERIAL | STEEL OVERALL |
| TWIST LENGTH | 10.000 INCHES MINIMUM IN |