PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4730000141813
4730000141813 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, attachment_method: SLOT, body_recess_depth: 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN, inner_groove_depth: 0.607 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, inner_groove_width: 0.080 INCHES NOMINAL IN, peripheral_diameter: 0.820 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-014-1813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4730000141813
NSN: 5330-00-014-1813
FSC: 5330
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
attachment_methodSLOT
body_recess_depth0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
inner_groove_depth0.607 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
inner_groove_width0.080 INCHES NOMINAL IN
peripheral_diameter0.820 INCHES NOMINAL IN
center_hole_diameter0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
fsc_application_dataMOTOR,HYDRAULIC,ACFT
cross-sectional_height0.150 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
attachment_feature_width0.062 INCHES NOMINAL IN
attachment_feature_length0.047 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
attachment_feature_quantity2
NSN5330-00-014-1813
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4730000141813 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT FEATURE WIDTH: 0.062 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 0.820 INCHES NOMINAL IN
•
FSC APPLICATION DATA: MOTOR,HYDRAULIC,ACFT
•
ATTACHMENT FEATURE QUANTITY: 2
•
INNER GROOVE WIDTH: 0.080 INCHES NOMINAL IN
•
ATTACHMENT FEATURE LENGTH: 0.047 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
BODY RECESS DEPTH: 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ATTACHMENT FEATURE WIDTH0.062 INCHES NOMINAL IN
PERIPHERAL DIAMETER0.820 INCHES NOMINAL IN
FSC APPLICATION DATAMOTOR,HYDRAULIC,ACFT
ATTACHMENT FEATURE QUANTITY2
INNER GROOVE WIDTH0.080 INCHES NOMINAL IN
ATTACHMENT FEATURE LENGTH0.047 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
BODY RECESS DEPTH0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
MATERIALSTEEL COMP 440C OVERALL
INNER GROOVE DEPTH0.607 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
S16001AInterchangeable
interchangeable cross-reference
interchangeable
FM516Interchangeable
interchangeable cross-reference
interchangeable
4-271914Interchangeable
interchangeable cross-reference
interchangeable
5870-1Interchangeable
interchangeable cross-reference
interchangeable
DS-922332Interchangeable
interchangeable cross-reference
interchangeable
S53124-008Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4730000141813?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4730000141813?
4730000141813 is a RETAINER,PACKING.
What parts can replace 4730000141813?
There are 11 known substitutes for 4730000141813: S16001A, FM516, 4-271914 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4730000141813?
4730000141813 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-014-1813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4730000141813

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026