PartsTable
Technical Data Sheet
Download PDF

47282 — LIFTER ROD ASSY

✓ Government record, cited
Lindy · MRO · MRO_GENERAL
PRODUCT OVERVIEW

47282: LIFTER ROD ASSY.

Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T. The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.

A robust snagless strain relief design prevents damage to the connector latch during installation and removal. This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themsel This part is cataloged in the U.S.

Government catalog under NSN 5305-00-013-1875, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 47282
NSN: 5305-00-013-1875
NIINs: 000131875, 004841498, 009008860, 009146837
FSC: 5305 — Screws
CAGE: F8676 — VALEO EQUIPEMENTS ELECTRIQUES MOTEUR (FRA)
SPECIFICATIONS
shapeIRREGULAR OR PARABOLIC
materialGLASS LENS
body_width1.500 INCHES NOMINAL IN
head_styleFILLISTER
lens_colorCOLORLESS
body_height3.750 INCHES NOMINAL IN
body_length1.500 INCHES NOMINAL IN
head_height0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_class2A A
body_materialMETAL
head_diameter0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
overall_width14.500 INCHES NOMINAL IN
NSN5305-00-013-1875
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 47282 · Lindy ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
FASTENER LENGTH: 0.188 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.188 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
FASTENER LENGTH0.188 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.188 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 4S STYLE
SCREW MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 3
131875Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFS92TYPE1STYLE4SReference document
Same NSN cross-reference
Reference document — Identification reference
56X45UReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 47282?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47282?
47282 is a LIFTER ROD ASSY manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 47282?
There are 3 known substitutes for 47282: 131875, FFS92TYPE1STYLE4S, 56X45U. Substitute compatibility should be verified for your specific system.
What is the NSN for 47282?
47282 is cataloged in the U.S. Government catalog under NSN 5305-00-013-1875. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47282