Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.<br>The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification.
The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themsel This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3020-00-033-6847, indicating validated use in U.S.
government and defense logistics supply chains.
| material | STEEL COMP E9310 OVERALL |
| body_style | WEBBED, WITH LIGHTENING HOLES |
| bore_style | W/ KEYWAY BOTH ENDS |
| tooth_form | STANDARD |
| pitch_diameter | 1.7907 INCHES MINIMUM AND 1.7917 INCHES MAXIMUM IN |
| pressure_angle | 20.0000 DEGREES |
| teeth_quantity | 43 |
| hardness_rating | 33.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| style_designator | PROTRUDING HUB, RECESSED BODY |
| surface_treatment | OXIDE OVERALL |
| face_nominal_width | 0.315 INCHES IN |
| hub_nominal_diameter | 0.480 INCHES FIRST END IN |
| NSN | 3020-00-033-6847 |
| BODY STYLE | WEBBED, WITH LIGHTENING HOLES |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| SURFACE TREATMENT | OXIDE OVERALL |
| TOOTH FORM | STANDARD |
| HUB NOMINAL DIAMETER | 0.480 INCHES FIRST END IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.205 INCHES BOTH ENDS IN |
| NOMINAL OUTSIDE DIAMETER | 1.867 INCHES IN |
| HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |