Cat.6 F/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250Mhz in a shielded version with foil shielding (F/UTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the skin effect , while the conductor cores are only subjected to very low electrical loads.
This allows the use of copper c This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0766, indicating validated use in U.S. government and defense logistics supply chains.
| material | STEEL OVERALL |
| cone_width | 1.1965 INCHES NOMINAL IN |
| body_length | 2.625 INCHES NOMINAL IN |
| bore_diameter | 1.5000 INCHES NOMINAL IN |
| turn_quantity | 630 SINGLE COMPONENT SINGLE SECONDARY |
| coil_form_type | SOLID SINGLE COMPONENT |
| inclosure_type | OPEN |
| mounting_method | CLAMP AND UNTHREADED HOLE(S) SINGLE GROUP |
| frequency_rating | 80.0 KILOHERTZ MINIMUM AND 600.0 KILOHERTZ MAXIMUM SINGLE COMPONENT |
| style_designator | NORMAL ANGLE |
| cone_corner_radius | 0.1406 INCHES NOMINAL IN |
| body_outside_diameter | 1.500 INCHES NOMINAL IN |
| NSN | 3110-00-100-0766 |
| BORE DIAMETER | 1.5000 INCHES NOMINAL IN |
| STANDARD TOLERANCE DESIGNATION | AFBMA CLASS 2 |
| STYLE DESIGNATOR | NORMAL ANGLE |
| CONE WIDTH | 1.1965 INCHES NOMINAL IN |
| MATERIAL | STEEL OVERALL |
| CONE CORNER RADIUS | 0.1406 INCHES NOMINAL IN |