471978: RESISTOR,FIXED,WIRE WOUND,INDUCT.
RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 6.0000 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.
Government catalog under NSN 3020-00-567-8825, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| body_style | PLAIN, SOLID |
| bore_style | PLAIN BOTH ENDS |
| tooth_form | STANDARD |
| pitch_diameter | 6.0000 INCHES NOMINAL IN |
| pressure_angle | 20.0000 DEGREES |
| teeth_quantity | 30 |
| hardness_rating | 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| special_features | TWO 5/16 IN. DIA HOLES LOCATED 1-5/8 IN. FROM SECOND END OF HUB 180 DEG APART IN |
| style_designator | PROTRUDING HUBS |
| face_nominal_width | 1.015 INCHES IN |
| hub_nominal_diameter | 2.000 INCHES SECOND END IN |
| NSN | 3020-00-567-8825 |
| FURNISHED ITEMS AND QUANTITY | 1 EXTERNALLY LUBRICATED BEARING |
| BORE NOMINAL DIAMETER | 1.253 INCHES BOTH ENDS IN |
| HUB NOMINAL DIAMETER | 2.000 INCHES SECOND END IN |
| HUB NOMINAL DIAMETER | 2.000 INCHES FIRST END IN |
| TEETH QUANTITY | 30 |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.437 INCHES SECOND END IN |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.406 INCHES FIRST END IN |
| HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |