PartsTable
Technical Data Sheet
Download PDF

47196 — BEARING,SLEEVE

✓ Government record, cited
Lindy · BOLT SCREW
PRODUCT OVERVIEW

47196: BEARING,SLEEVE.

Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.

A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions. Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30 This part is cataloged in the U.S.

Government catalog under NSN 5305-00-132-7815, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
47196
NSN: 5305-00-132-7815
NIINs: 001327815, 011220390
FSC: 5305 — Screws
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleKNURLED NO. 4
head_height0.190 INCHES NOMINAL IN
thread_class2A A
head_diameter0.305 INCHES NOMINAL IN
thread_length0.562 INCHES NOMINAL IN
fastener_length0.609 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPAINT OVERALL
width_across_flats0.156 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
NSN5305-00-132-7815
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 47196 · Lindy ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.190 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.609 INCHES NOMINAL IN
•
THREAD LENGTH: 0.562 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: KNURLED NO. 4
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: PAINT OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
HEAD HEIGHT0.190 INCHES NOMINAL IN
FASTENER LENGTH0.609 INCHES NOMINAL IN
THREAD LENGTH0.562 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEKNURLED NO. 4
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPAINT OVERALL
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
20-56Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 47196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47196?
47196 is a BEARING,SLEEVE manufactured by Lindy.
What parts can replace 47196?
There is 1 known substitute for 47196: 20-56. Substitute compatibility should be verified for your specific system.
What is the NSN for 47196?
47196 is cataloged in the U.S. Government catalog under NSN 5305-00-132-7815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47196