PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 471847
471847 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.000 INCHES NOMINAL IN, aperture_width: 5.250 INCHES NOMINAL IN, overall_length: 9.250 INCHES NOMINAL IN, aperture_length: 7.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-509-1931, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
471847
NSN: 5330-00-509-1931
FSC: 5330
CAGE: 00447 — WABCO CONSTRUCTION AND MINING EQUIPMENT GROUP INDIANAPOLIS PLANT AN AMERICAN STANDARD INC CO (USA)
SPECIFICATIONS
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.000 INCHES NOMINAL IN
aperture_width5.250 INCHES NOMINAL IN
overall_length9.250 INCHES NOMINAL IN
aperture_length7.750 INCHES NOMINAL IN
bolt_hole_quantity7
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.438 INCHES NOMINAL IN
NSN5330-00-509-1931
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 471847 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 7
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.438 INCHES NOMINAL IN
•
APERTURE WIDTH: 5.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH7.000 INCHES NOMINAL IN
OVERALL LENGTH9.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY7
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.438 INCHES NOMINAL IN
APERTURE WIDTH5.250 INCHES NOMINAL IN
APERTURE LENGTH7.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
405749Interchangeable
interchangeable cross-reference
interchangeable
PL405550-01-01 FN 192Interchangeable
interchangeable cross-reference
interchangeable
PL405550-01-01Interchangeable
interchangeable cross-reference
interchangeable
D3075Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 471847?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 471847?
471847 is a GASKET.
What parts can replace 471847?
There are 4 known substitutes for 471847: 405749, PL405550-01-01 FN 192, PL405550-01-01 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 471847?
471847 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-509-1931. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 471847

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026