PartsTable
Technical Data Sheet
471618 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ARM,PIVOTING WHEEL SPINDLE is a the manufacturer industrial component. Key specifications include end_item_identification: GENERAL MOTORS 1973-1984 LIGHT DUTY TRUCKS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-426-4446, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
471618
NSN: 5330-00-426-4446
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
end_item_identificationGENERAL MOTORS 1973-1984 LIGHT DUTY TRUCKS
NSN5330-00-426-4446
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 471618 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT DIAMETER: 0.999 INCHES MINIMUM AND 1.001 INCHES MAXIMUM IN
HOUSING BORE DIAMETER: 1.5748 INCHES MINIMUM AND 1.5754 INCHES MAXIMUM IN
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLE: RECESSED
SEAL WIDTH: 0.3125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION: A53-1 FSCM 71041 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER0.999 INCHES MINIMUM AND 1.001 INCHES MAXIMUM IN
HOUSING BORE DIAMETER1.5748 INCHES MINIMUM AND 1.5754 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLERECESSED
SEAL WIDTH0.3125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONA53-1 FSCM 71041 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
55226Interchangeable
interchangeable cross-reference
interchangeable
30740Interchangeable
interchangeable cross-reference
interchangeable
P-8-7355Interchangeable
interchangeable cross-reference
interchangeable
84-20103-306Interchangeable
interchangeable cross-reference
interchangeable
84-50101-207Interchangeable
interchangeable cross-reference
interchangeable
471632Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 471618?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 471618?
471618 is a ARM,PIVOTING WHEEL SPINDLE.
What parts can replace 471618?
There are 14 known substitutes for 471618: 55226, 30740, P-8-7355 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 471618?
471618 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-426-4446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 471618