PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 47160-5
47160-5 ✓ Verified by PartsTable
Gorenje · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a Gorenje tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 0.4650 INCHES NOMINAL IN, outside_diameter: 2.3280 INCHES NOMINAL IN, special_features: DUTY CLASS LM SERIES, style_designator: NORMAL ANGLE, backface_corner_radius: 0.0460 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-606-1840, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
47160-5
NSN: 3110-00-606-1840
FSC: 3110
CAGE: 70142 — AEROIL PRODUCTS CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.4650 INCHES NOMINAL IN
outside_diameter2.3280 INCHES NOMINAL IN
special_featuresDUTY CLASS LM SERIES
style_designatorNORMAL ANGLE
backface_corner_radius0.0460 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-606-1840
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 47160-5 · Gorenje ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 2.3280 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.4650 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0460 INCHES NOMINAL IN
SPECIAL FEATURESDUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER2.3280 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
57817BInterchangeable
interchangeable cross-reference
interchangeable
57817AInterchangeable
interchangeable cross-reference
interchangeable
57817Interchangeable
interchangeable cross-reference
interchangeable
104081Interchangeable
interchangeable cross-reference
interchangeable
215950Interchangeable
interchangeable cross-reference
interchangeable
0215950Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 47160-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47160-5?
47160-5 is a CUP,TAPERED ROLLER BEARING manufactured by Gorenje.
What parts can replace 47160-5?
There are 29 known substitutes for 47160-5: 57817B, 57817A, 57817 and 26 more. Substitute compatibility should be verified for your specific system.
Is 47160-5 still available?
47160-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47160-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026