Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.<br>Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification.
The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.<br>Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30 This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0589, indicating validated use in U.S. government and defense logistics supply chains.
| diameter | 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN |
| material | PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL |
| overall_width | 0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| special_features | COLOR NATURAL |
| style_designator | SINGLE LOOP |
| tongue_hole_type | ROUND, UNTHREADED |
| material_thickness | 0.085 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| loop_inside_diameter | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN |
| material_document_and_classification | ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| distance_from_loop_center_to_tongue_end | 0.793 INCHES MINIMUM AND 0.863 INCHES MAXIMUM IN |
| center_to_center_distance_between_loop_and_mounting_hole | 0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN |
| NSN | 3110-00-100-0589 |
| END ITEM IDENTIFICATION | MRAP - MRV; MRAP BUFFALO MK2A2; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS) |
| BACKFACE CORNER RADIUS | 0.1250 INCHES NOMINAL IN |
| STANDARD TOLERANCE DESIGNATION | AFBMA CLASS 2 |
| STYLE DESIGNATOR | NORMAL ANGLE |
| MATERIAL | STEEL OVERALL |
| OVERALL WIDTH | 1.0313 INCHES NOMINAL IN |
| OUTSIDE DIAMETER | 5.2500 INCHES NOMINAL IN |