PartsTable
Technical Data Sheet
Download PDF

47137 — ROLLER,SCREW ASSEMB

✓ Government record, cited
Lindy · ORING SEAL
PRODUCT OVERVIEW

47137: ROLLER,SCREW ASSEMB.

Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.

A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions. Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30 This part is cataloged in the U.S.

Government catalog under NSN 5340-00-423-0910, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
47137
NSN: 5340-00-423-0910
NIINs: 004230910, 012261866, 016406277
FSC: 5340 — Hardware, Commercial
CAGE: 92878 — HDT EXPEDITIONARY SYSTEMS INC (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.750 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.109 INCHES NOMINAL IN
loop_inside_diameter2.625 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.875 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.438 INCHES NOMINAL IN
NSN5340-00-423-0910
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 47137 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.109 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.875 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.438 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.281 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.109 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.875 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.438 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER2.625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 47137?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47137?
47137 is a ROLLER,SCREW ASSEMB manufactured by Lindy.
What is the NSN for 47137?
47137 is cataloged in the U.S. Government catalog under NSN 5340-00-423-0910. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47137