PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4713165K
4713165K ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, housing_bore_diameter: 2.686 INCHES NOMINAL IN, sealing_element_style: ANGULAR-OPPOSED, accommodated_shaft_diameter: 1.562 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-414-4432, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4713165K
NSN: 5330-00-414-4432
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
housing_bore_diameter2.686 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter1.562 INCHES NOMINAL IN
NSN5330-00-414-4432
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4713165K MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
CASE STYLE: RECESSED
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
•
HOUSING BORE DIAMETER: 2.686 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
ACCOMMODATED SHAFT DIAMETER: 1.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
CASE STYLERECESSED
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
HOUSING BORE DIAMETER2.686 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR-OPPOSED
ACCOMMODATED SHAFT DIAMETER1.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
5079Interchangeable
interchangeable cross-reference
interchangeable
9317932Interchangeable
interchangeable cross-reference
interchangeable
PRECISION LINE LP4Interchangeable
interchangeable cross-reference
interchangeable
577251Interchangeable
interchangeable cross-reference
interchangeable
961NPInterchangeable
interchangeable cross-reference
interchangeable
471316Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4713165K?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4713165K?
4713165K is a SEAL,PLAIN ENCASED.
What parts can replace 4713165K?
There are 7 known substitutes for 4713165K: 5079, 9317932, PRECISION LINE LP4 and 4 more. Substitute compatibility should be verified for your specific system.
Is 4713165K still available?
4713165K is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4713165K

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026