PartsTable
Technical Data Sheet
Download PDF

47114 — SOCKET,SOCKET WRENCH

✓ Government record, cited
Lindy · ORING SEAL
PRODUCT OVERVIEW

47114: SOCKET,SOCKET WRENCH.

The SOCKET,SOCKET WRENCH is a Lindy industrial component. Key specifications include material: STEEL OVERALL, overall_length: 73.7 MILLIMETERS NOMINAL MM, drive_end_shape: SQUARE SINGLE END INTERNAL, style_designator: UNIVERSAL JOINT, surface_treatment: OXIDE OVERALL, drive_surface_size: 0.500 INCHES NOMINAL SINGLE END IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-069-5610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
47114
NSN: 5340-00-069-5610
NIINs: 000695610, 001384605, 003026398, 011860992, 015839586, 016169496
FSC: 5340 — Hardware, Commercial
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length73.7 MILLIMETERS NOMINAL MM
drive_end_shapeSQUARE SINGLE END INTERNAL
style_designatorUNIVERSAL JOINT
surface_treatmentOXIDE OVERALL
drive_surface_size0.500 INCHES NOMINAL SINGLE END IN
wrenching_surface_size14.0 MILLIMETERS NOMINAL SINGLE END MM
wrenching_surface_shape6 POINT SINGLE END INTERNAL
drive_end_outside_diameter23.8 MILLIMETERS NOMINAL MM
wrenching_end_opening_depth8.6 MILLIMETERS NOMINAL MM
wrenching_end_outside_diameter21.3 MILLIMETERS NOMINAL MM
NSN5340-00-069-5610
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 47114 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.047 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE BAND
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.047 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.814 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
MATERIALGLASS FIBER CUSHION
SUBSTITUTES & CROSS-REFERENCES 1
9M145-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 47114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47114?
47114 is a SOCKET,SOCKET WRENCH manufactured by Lindy.
What parts can replace 47114?
There is 1 known substitute for 47114: 9M145-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 47114?
47114 is cataloged in the U.S. Government catalog under NSN 5340-00-069-5610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47114

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.