PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4710162-1
4710162-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.875 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, THREADED, surface_treatment: CADMIUM BAND, material_thickness: 0.105 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-948-0961, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4710162-1
NSN: 5340-00-948-0961
FSC: 5340
CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.875 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, THREADED
surface_treatmentCADMIUM BAND
material_thickness0.105 INCHES NOMINAL IN
nominal_thread_size0.312 INCHES IN
loop_inside_diameter2.125 INCHES NOMINAL IN
thread_quantity_per_inch18
distance_from_loop_center_to_tongue_end2.042 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.542 INCHES NOMINAL IN
NSN5340-00-948-0961
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4710162-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.542 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 18
•
SURFACE TREATMENT: CADMIUM BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.042 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
LOOP INSIDE DIAMETER: 2.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.542 INCHES NOMINAL IN
THREAD QUANTITY PER INCH18
SURFACE TREATMENTCADMIUM BAND
DISTANCE FROM LOOP CENTER TO TONGUE END2.042 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.312 INCHES IN
OVERALL WIDTH0.875 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER2.125 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, THREADED
MATERIALSTEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
10339AAInterchangeable
interchangeable cross-reference
interchangeable
5030-110Interchangeable
interchangeable cross-reference
interchangeable
2767Interchangeable
interchangeable cross-reference
interchangeable
T2015Interchangeable
interchangeable cross-reference
interchangeable
30055-8Interchangeable
interchangeable cross-reference
interchangeable
TR1285Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4710162-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4710162-1?
4710162-1 is a CLAMP,LOOP.
What parts can replace 4710162-1?
There are 15 known substitutes for 4710162-1: 10339AA, 5030-110, 2767 and 12 more. Substitute compatibility should be verified for your specific system.
Is 4710162-1 still available?
4710162-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4710162-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026