PartsTable / COMPONENT / 4710162
4710162
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.875 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, THREADED, surface_treatment: CADMIUM BAND, material_thickness: 0.105 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-948-0961, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
4710162
NSN: 5340-00-948-0961 FSC: 5340 CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
material STEEL BAND overall_width 0.875 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, THREADED surface_treatment CADMIUM BAND material_thickness 0.105 INCHES NOMINAL IN nominal_thread_size 0.312 INCHES IN loop_inside_diameter 2.125 INCHES NOMINAL IN thread_quantity_per_inch 18 distance_from_loop_center_to_tongue_end 2.042 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 1.542 INCHES NOMINAL IN NSN 5340-00-948-0961
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 4710162
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.542 INCHES NOMINAL IN
• THREAD QUANTITY PER INCH: 18
• SURFACE TREATMENT: CADMIUM BAND
• DISTANCE FROM LOOP CENTER TO TONGUE END: 2.042 INCHES NOMINAL IN
• NOMINAL THREAD SIZE: 0.312 INCHES IN
• STYLE DESIGNATOR: SINGLE LOOP
• LOOP INSIDE DIAMETER: 2.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 1.542 INCHES NOMINAL IN THREAD QUANTITY PER INCH 18 SURFACE TREATMENT CADMIUM BAND DISTANCE FROM LOOP CENTER TO TONGUE END 2.042 INCHES NOMINAL IN NOMINAL THREAD SIZE 0.312 INCHES IN OVERALL WIDTH 0.875 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP LOOP INSIDE DIAMETER 2.125 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, THREADED MATERIAL STEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
10339AA Interchangeable interchangeable cross-reference
interchangeable
5030-110 Interchangeable interchangeable cross-reference
interchangeable
2767 Interchangeable interchangeable cross-reference
interchangeable
T2015 Interchangeable interchangeable cross-reference
interchangeable
30055-8 Interchangeable interchangeable cross-reference
interchangeable
TR1285 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 4710162?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4710162?
4710162 is a CLAMP,LOOP.
What parts can replace 4710162?
There are 14 known substitutes for 4710162: 10339AA, 5030-110, 2767 and 11 more. Substitute compatibility should be verified for your specific system.
Is 4710162 still available?
4710162 is currently cancelled.
Request a Quote — 4710162