PartsTable
Technical Data Sheet
Download PDF

471-33 — BEARING,BALL,ANNULAR

✓ Government record, cited
Lindy · TAPERED BEARING
PRODUCT OVERVIEW

471-33: BEARING,BALL,ANNULAR.

Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.

A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions. Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30 This part is cataloged in the U.S.

Government catalog under NSN 3110-00-850-4082, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
471-33
NSN: 3110-00-850-4082
NIINs: 008504082, 010126038, 011762781, 013023142
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 04320 — CURTISS-WRIGHT CONTROLS INTEGRATED SENSING, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.3125 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresBEARING 1/2 FULL OF SPECIFIED LUBRICANT
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
overall_outside_diameter1.1250 INCHES NOMINAL IN
NSN3110-00-850-4082
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 471-33 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: OIL
•
INTERNAL CLEARANCE: 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALOIL
INTERNAL CLEARANCE0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.3125 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.1250 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 7
R8FFReference document
Same NSN cross-reference
Reference document — Secondary reference
L01460-0001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
164847-011Reference document
Same NSN cross-reference
Reference document — Secondary reference
77R8Reference document
Same NSN cross-reference
Reference document — Secondary reference
R8SSReference document
Same NSN cross-reference
Reference document — Secondary reference
R426-0223Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 471-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 471-33?
471-33 is a BEARING,BALL,ANNULAR manufactured by Lindy.
What parts can replace 471-33?
There are 7 known substitutes for 471-33: R8FF, L01460-0001, 164847-011 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 471-33?
471-33 is cataloged in the U.S. Government catalog under NSN 3110-00-850-4082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 471-33

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.