PartsTable
Technical Data Sheet
Download PDF

470786-10 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

470786-10: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.04 INCHES MINIMUM AND 0.05 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-665-9706, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
470786-10
NSN: 5305-01-665-9706
FSC: 5305 — Screws
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.04 INCHES MINIMUM AND 0.05 INCHES MAXIMUM IN
thread_class2A A
thread_length0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
internal_drive_styleW/O INTERNAL DRIVE
end_item_identificationAN AAS 54 MTS
nominal_thread_diameter0.086 INCHES IN
thread_quantity_per_inch56
NSN5305-01-665-9706
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 470786-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.04 INCHES MINIMUM AND 0.05 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
BEARING SURFACE OF HEAD SURFACE TREATMENT: PASSIVATE
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 96214-470786 MANUFACTURERS STANDARD
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.04 INCHES MINIMUM AND 0.05 INCHES MAXIMUM IN
FASTENER LENGTH0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
THREAD LENGTH0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
BEARING SURFACE OF HEAD SURFACE TREATMENTPASSIVATE
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA96214-470786 MANUFACTURERS STANDARD
WIDTH BETWEEN FLATS0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SCREW MATERIALSTEEL CORROSION RESISTING
SUBSTITUTES & CROSS-REFERENCES 1
470786Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 470786-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 470786-10?
470786-10 is a SCREW,MACHINE.
What parts can replace 470786-10?
There is 1 known substitute for 470786-10: 470786. Substitute compatibility should be verified for your specific system.
What is the NSN for 470786-10?
470786-10 is cataloged in the U.S. Government catalog under NSN 5305-01-665-9706. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 470786-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.