470490-1 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

470490-1: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 0.741 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: BALL SHAFT, pilot_length: 0.0460 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM IN, shaft_length: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 2815-00-999-3220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 470490-1

NSN: 2815-00-999-3220
NIINs: 009993220, 012849023
FSC: 2815 — Diesel Engines and Components
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)

SPECIFICATIONS

body_style	CYLINDRICAL SERVO MOUNTED
body_length	0.741 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
bearing_type	BALL SHAFT
pilot_length	0.0460 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM IN
shaft_length	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
shaft_runout	0.001 INCHES IN
actuator_type	SINGLE SHAFT
body_diameter	1.046 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
cubic_measure	0.147 CUBIC INCHES
lateral_runout	0.0015 INCHES IN
pilot_diameter	0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM IN
NSN	2815-00-999-3220

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: CAST IRON BODY; CAST ALUMINUM COVER; CRES POPPET; 8.640 IN. O/A LG; 5.050 IN. O/A DIA; POPPET SEAT ANGLE 45.0 DEG; HEAD 2.178 IN. DIA; MTG FLANGE 3.300 IN. BY 3.232 IN. W/4 BOLT HOLES 0.438 IN. DIA LOCATED ON 1.875 IN. AND 2.500 IN. C TO C; OTHER END HAS TWO 2 BOLT FLANGES 2.390 IN. LG 1.055 IN. W; THD INTERNAL BOLT HOLES 3/8-16 UNC LOCATED ON 1.625 IN. C TO C; ONE 1/8-27 NPT THD PORT IN

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

CAST IRON BODY; CAST ALUMINUM COVER; CRES POPPET; 8.640 IN. O/A LG; 5.050 IN. O/A DIA; POPPET SEAT ANGLE 45.0 DEG; HEAD 2.178 IN. DIA; MTG FLANGE 3.300 IN. BY 3.232 IN. W/4 BOLT HOLES 0.438 IN. DIA LOCATED ON 1.875 IN. AND 2.500 IN. C TO C; OTHER END HAS TWO 2 BOLT FLANGES 2.390 IN. LG 1.055 IN. W; THD INTERNAL BOLT HOLES 3/8-16 UNC LOCATED ON 1.625 IN. C TO C; ONE 1/8-27 NPT THD PORT IN

SUBSTITUTES & CROSS-REFERENCES 1

2M7938Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 470490-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 470490-1?

470490-1 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).

What parts can replace 470490-1?

There is 1 known substitute for 470490-1: 2M7938. Substitute compatibility should be verified for your specific system.

What is the NSN for 470490-1?

470490-1 is cataloged in the U.S. Government catalog under NSN 2815-00-999-3220. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

470490-1 — RESISTOR,VARIABLE,WIRE WOUND,PRE

Request a Quote — 470490-1