PartsTable
Technical Data Sheet
Download PDF

470467PCLN105 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

470467PCLN105: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING AND STEEL COMP 301 AND STEEL COMP 302 AND STEEL COMP 304 OR STEEL COMP 316 OVERALL, thickness: 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN, hole_diameter: 0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN, overall_diameter: 0.745 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-275-0616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
470467PCLN105
NSN: 5310-00-275-0616
NIINs: 002750616, 013844656
FSC: 5310 — Nuts and Washers
CAGE: 72599 — ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING AND STEEL COMP 301 AND STEEL COMP 302 AND STEEL COMP 304 OR STEEL COMP 316 OVERALL
thickness0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
hole_diameter0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN
overall_diameter0.745 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-5059, ANNEALED MIL SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-35 MIL SPEC ALL TREATMENT RESPONSES OVERALL
NSN5310-00-275-0616
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 470467PCLN105 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.745 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2 GRADE AND B CLASS
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.745 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 GRADE AND B CLASS
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
53102750616Reference document
Same NSN cross-reference
Reference document — Informative reference only
470466PC123Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310PL1446980Reference document
Same NSN cross-reference
Reference document — Informative reference only
FF-W-92Reference document
Same NSN cross-reference
Reference document — Identification reference
AN960C716LSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8805897Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 470467PCLN105?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 470467PCLN105?
470467PCLN105 is a WASHER,FLAT.
What parts can replace 470467PCLN105?
There are 7 known substitutes for 470467PCLN105: 53102750616, 470466PC123, 5310PL1446980 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 470467PCLN105?
470467PCLN105 is cataloged in the U.S. Government catalog under NSN 5310-00-275-0616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 470467PCLN105

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.