PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 470452
470452 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1090 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, bore_diameter: 0.620 INCHES NOMINAL IN, coil_quantity: 14.5, inside_diameter: 0.431 INCHES NOMINAL IN, style_designator: CYLINDRICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-451-5330, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
470452
NSN: 5330-00-451-5330
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL COMP 1090 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
bore_diameter0.620 INCHES NOMINAL IN
coil_quantity14.5
inside_diameter0.431 INCHES NOMINAL IN
style_designatorCYLINDRICAL
spring_free_length2.368 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_free_outside_diameter0.599 INCHES NOMINAL IN
material_document_and_classificationAMS 5112 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-451-5330
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 470452 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 2.834 INCHES MINIMUM AND 2.835 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.375 INCHES NOMINAL IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER2.834 INCHES MINIMUM AND 2.835 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
5590-5Interchangeable
interchangeable cross-reference
interchangeable
D300Interchangeable
interchangeable cross-reference
interchangeable
262098Interchangeable
interchangeable cross-reference
interchangeable
811735Interchangeable
interchangeable cross-reference
interchangeable
SMB187246Interchangeable
interchangeable cross-reference
interchangeable
470452Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 470452?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 470452?
470452 is a SPRING,HELICAL,COMPRESSION.
What parts can replace 470452?
There are 10 known substitutes for 470452: 5590-5, D300, 262098 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 470452?
470452 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-451-5330. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 470452

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026