PartsTable
Technical Data Sheet
Download PDF

4702-2 — Verbatim Pro 64 GB SDXC UHS Class 10

✓ Government record, cited
Legrand · MRO · MRO_GENERAL
PRODUCT OVERVIEW

4702-2: Verbatim Pro 64 GB SDXC UHS Class 10.

Verbatim Pro memory cards give Pro level performance to advanced cameras and HD camcorders. UHS Speed Class 3 (U3) rating means you can capture 4k ultra HD and Full HD video then transfer quickly to your computer for viewing and editing. Suitable for 4k ultra HD video capture and compatible with any device with an SDHC/SDXC* memory card slot.

Read Speed: up to 90MB/Sec.** Write Speed: up to 45MB/Sec.** *SDXC compatible host device required **UHS-1 compatible device required, actual performance may vary depending on host device, interface & usage conditions This part is cataloged in the U.S. Government catalog under NSN 5310-00-177-7655, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 4702-2
NSN: 5310-00-177-7655
NIINs: 001777655, 004119785, 009761283
FSC: 5310 — Nuts and Washers
CAGE: 0W357 — PDI GROUND SUPPORT SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter1.005 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
outside_diameter1.687 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
style_designatorKEY
features_providedCASEHARDENED
material_thickness0.119 INCHES NOMINAL IN
internal_key_quantity1
internal_straight_key_width0.141 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
material_document_and_classificationC1018 FSCM 22938 MFR REF SINGLE MATERIAL RESPONSE OVERALL
distance_from_centerline_to_top_of_internal_key0.341 INCHES MINIMUM AND 0.351 INCHES MAXIMUM IN
NSN5310-00-177-7655
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4702-2 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
64GB Capacity
•
INTERNAL STRAIGHT KEY WIDTH: 0.141 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY: 0.341 INCHES MINIMUM AND 0.351 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: KEY
•
MATERIAL DOCUMENT AND CLASSIFICATION: C1018 FSCM 22938 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.687 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
•
FEATURES PROVIDED: CASEHARDENED
•
MATERIAL THICKNESS: 0.119 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
INTERNAL STRAIGHT KEY WIDTH0.141 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY0.341 INCHES MINIMUM AND 0.351 INCHES MAXIMUM IN
STYLE DESIGNATORKEY
MATERIAL DOCUMENT AND CLASSIFICATIONC1018 FSCM 22938 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.687 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
MATERIAL THICKNESS0.119 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
INTERNAL KEY QUANTITY1
HOLE DIAMETER1.005 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
35360080Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
65A0578-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5001/9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5316Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4702-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4702-2?
4702-2 is a Verbatim Pro 64 GB SDXC UHS Class 10 manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4702-2?
There are 4 known substitutes for 4702-2: 35360080, 65A0578-2, 5001/9 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4702-2?
4702-2 is cataloged in the U.S. Government catalog under NSN 5310-00-177-7655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4702-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.