PartsTable
Technical Data Sheet
Download PDF

4701-41 — BEARING,WASHER,THRUST

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4701-41: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, hole_diameter: 0.401 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN, outside_diameter: 0.805 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN, surface_treatment: ZINC BODY, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-865-6823, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4701-41
NSN: 5330-00-865-6823
NIINs: 008656823, 013295326, 013938820, 017257731
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
hole_diameter0.401 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
outside_diameter0.805 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN
surface_treatmentZINC BODY
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyFLAT, WASHER
NSN5330-00-865-6823
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4701-41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 1.254 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER1.254 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
HCF12312Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 4701-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4701-41?
4701-41 is a BEARING,WASHER,THRUST.
What parts can replace 4701-41?
There is 1 known substitute for 4701-41: HCF12312. Substitute compatibility should be verified for your specific system.
What is the NSN for 4701-41?
4701-41 is cataloged in the U.S. Government catalog under NSN 5330-00-865-6823. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4701-41

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.