PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 470-2501K 3/4 IN. SHAFT
470-2501K 3/4 IN. SHAFT ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The 470-2501K 3/4 IN. SHAFT is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-577-9748, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
470-2501K 3/4 IN. SHAFT
NSN: 5905-00-577-9748
FSC: 5905
CAGE: 12697 — CLAROSTAT SENSORS AND CONTROLS (USA)
SPECIFICATIONS
Part Number470-2501K 3/4 IN. SHAFT
NSN5905-00-577-9748
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available 470-2501K 3/4 IN. SHAFT TITLE COMPONENT PN 470-2501K 3/4 IN. SHAFT MFR 470-2501K 3/4 IN. SHAF
KEY FEATURES
•
MAXIMUM STOP TORQUE: 128.00 INCH-OUNCES IN
•
ACTUATOR TYPE: SINGLE SHAFT
•
POWER DISSIPATION RATING PER SECTION IN WATTS: 1.0 FREE AIR SINGLE SECTION
•
TEST DATA DOCUMENT: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER: 70.0 SINGLE SECTION
•
SPECIFICATION/STANDARD DATA: 81349-MIL-R-94/4 GOVERNMENT SPECIFICATION
•
RESISTANCE TOLERANCE PER SECTION IN PERCENT: -10.0 TO 10.0 SINGLE SECTION
•
TERMINAL LOCATION: RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM STOP TORQUE128.00 INCH-OUNCES IN
ACTUATOR TYPESINGLE SHAFT
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
SPECIFICATION/STANDARD DATA81349-MIL-R-94/4 GOVERNMENT SPECIFICATION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
NONTURN DEVICE RADIUS0.422 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
SCREW THREAD DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
95-0388Interchangeable
interchangeable cross-reference
interchangeable
830303Interchangeable
interchangeable cross-reference
interchangeable
21098Interchangeable
interchangeable cross-reference
interchangeable
6879HInterchangeable
interchangeable cross-reference
interchangeable
324A122Interchangeable
interchangeable cross-reference
interchangeable
352-1639Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 470-2501K 3/4 IN. SHAFT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 470-2501K 3/4 IN. SHAFT?
470-2501K 3/4 IN. SHAFT is a 470-2501K 3/4 IN. SHAFT.
What parts can replace 470-2501K 3/4 IN. SHAFT?
There are 28 known substitutes for 470-2501K 3/4 IN. SHAFT: 95-0388, 830303, 21098 and 25 more. Substitute compatibility should be verified for your specific system.
Is 470-2501K 3/4 IN. SHAFT still available?
470-2501K 3/4 IN. SHAFT is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 470-2501K 3/4 IN. SHAFT

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026