PartsTable
Technical Data Sheet
Download PDF

47-150-261-1 — WASHER,SHOULDERED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

47-150-261-1: WASHER,SHOULDERED.

The WASHER,SHOULDERED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, hole_diameter: 0.312 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, shoulder_height: 0.045 INCHES NOMINAL IN, outside_diameter: 0.850 INCHES NOMINAL IN, special_features: OD OF WASHER HAS TWO PARALLEL FLAT SURFACES, style_designator: SHOULDERED. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-871-8779, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
47-150-261-1
NSN: 5310-00-871-8779
FSC: 5310 — Nuts and Washers
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
hole_diameter0.312 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
shoulder_height0.045 INCHES NOMINAL IN
outside_diameter0.850 INCHES NOMINAL IN
special_featuresOD OF WASHER HAS TWO PARALLEL FLAT SURFACES
style_designatorSHOULDERED
shoulder_diameter0.580 INCHES NOMINAL IN
material_thickness0.095 INCHES NOMINAL IN
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-871-8779
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 47-150-261-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER HEIGHT: 0.045 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.850 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.095 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.580 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 303 OVERALL
TECHNICAL CHARACTERISTICS
SHOULDER HEIGHT0.045 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDERED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.850 INCHES NOMINAL IN
MATERIAL THICKNESS0.095 INCHES NOMINAL IN
SHOULDER DIAMETER0.580 INCHES NOMINAL IN
SPECIAL FEATURESOD OF WASHER HAS TWO PARALLEL FLAT SURFACES
MATERIALSTEEL COMP 303 OVERALL
HOLE DIAMETER0.312 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 47-150-261-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47-150-261-1?
47-150-261-1 is a WASHER,SHOULDERED.
What is the NSN for 47-150-261-1?
47-150-261-1 is cataloged in the U.S. Government catalog under NSN 5310-00-871-8779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47-150-261-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.