PartsTable
Technical Data Sheet
Download PDF

46F2235 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

46F2235: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN, thread_length: 0.120 INCHES NOMINAL IN, screw_material: STEEL COMP 1017. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-294-9394, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46F2235
NSN: 5305-01-294-9394
FSC: 5305 — Screws
CAGE: 1VZM8 — NEWARK CORPORATION DIV NEWARK (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
thread_length0.120 INCHES NOMINAL IN
screw_materialSTEEL COMP 1017
fastener_length0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedRETAINING CLIP
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5305-01-294-9394
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 46F2235 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.120 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
FEATURES PROVIDED: RETAINING CLIP
•
HEAD STYLE: FILLISTER
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.120 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
FEATURES PROVIDEDRETAINING CLIP
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1017
SUBSTITUTES & CROSS-REFERENCES 3
93F3698 OR D20419-183Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1819983Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
46F2235 OR 17D20419-XReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 46F2235?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46F2235?
46F2235 is a SCREW,MACHINE.
What parts can replace 46F2235?
There are 3 known substitutes for 46F2235: 93F3698 OR D20419-183, 1819983, 46F2235 OR 17D20419-X. Substitute compatibility should be verified for your specific system.
What is the NSN for 46F2235?
46F2235 is cataloged in the U.S. Government catalog under NSN 5305-01-294-9394. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46F2235

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.