PartsTable
Technical Data Sheet
Download PDF

4696-40-450-6123 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4696-40-450-6123: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 3.000 INCHES NOMINAL IN, height: 0.500 INCHES NOMINAL IN, material: ALUMINUM SLIDE, closed_length: 26.000 INCHES NOMINAL IN, extended_length: 46.000 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-426-4623, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4696-40-450-6123
NSN: 5340-01-426-4623
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width3.000 INCHES NOMINAL IN
height0.500 INCHES NOMINAL IN
materialALUMINUM SLIDE
closed_length26.000 INCHES NOMINAL IN
extended_length46.000 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
style_designator3 - MEMBER
side_for_which_designedLEFT HAND OR RIGHT HAND
NSN5340-01-426-4623
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4696-40-450-6123 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED LENGTH: 46.000 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: 3 - MEMBER
•
HEIGHT: 0.500 INCHES NOMINAL IN
•
CLOSED LENGTH: 26.000 INCHES NOMINAL IN
•
WIDTH: 3.000 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM SLIDE
•
SIDE FOR WHICH DESIGNED: LEFT HAND OR RIGHT HAND
TECHNICAL CHARACTERISTICS
EXTENDED LENGTH46.000 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATOR3 - MEMBER
HEIGHT0.500 INCHES NOMINAL IN
CLOSED LENGTH26.000 INCHES NOMINAL IN
WIDTH3.000 INCHES NOMINAL IN
MATERIALALUMINUM SLIDE
SIDE FOR WHICH DESIGNEDLEFT HAND OR RIGHT HAND
SUBSTITUTES & CROSS-REFERENCES 2
211058637Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1303005Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4696-40-450-6123?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4696-40-450-6123?
4696-40-450-6123 is a SLIDE,DRAWER,EXTENSION.
What parts can replace 4696-40-450-6123?
There are 2 known substitutes for 4696-40-450-6123: 211058637, 1303005. Substitute compatibility should be verified for your specific system.
What is the NSN for 4696-40-450-6123?
4696-40-450-6123 is cataloged in the U.S. Government catalog under NSN 5340-01-426-4623. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4696-40-450-6123

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.