PartsTable
Technical Data Sheet
Download PDF

468846 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

468846: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.550 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, first_leg_length: 0.810 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-441-4635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
468846
NSN: 5340-00-441-4635
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.550 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
first_leg_length0.810 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
first_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_end_radius0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NSN5340-00-441-4635
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 468846 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
SECOND LEG WIDTH0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
SECOND LEG LENGTH0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 468846?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 468846?
468846 is a BRACKET,ANGLE.
What is the NSN for 468846?
468846 is cataloged in the U.S. Government catalog under NSN 5340-00-441-4635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 468846

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.