PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 46872 ITEM 11
46872 ITEM 11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, chamfer_length: 13.0 INCHES NOMINAL ALL ENDS IN, drilled_hole_location: BOTH ENDS, end_item_identification: EAV ACTUATOR, part_name_assigned_by_controlling_agency: ROD - TIE 1/2 - 13X21.5. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-617-4829, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46872 ITEM 11
NSN: 5340-01-617-4829
FSC: 5340
CAGE: 1KHV0 — EXLAR CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
chamfer_length13.0 INCHES NOMINAL ALL ENDS IN
drilled_hole_locationBOTH ENDS
end_item_identificationEAV ACTUATOR
part_name_assigned_by_controlling_agencyROD - TIE 1/2 - 13X21.5
NSN5340-01-617-4829
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 46872 ITEM 11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DRILLED HOLE LOCATION: BOTH ENDS
•
MATERIAL: STEEL OVERALL
•
CHAMFER LENGTH: 13.0 INCHES NOMINAL ALL ENDS IN
TECHNICAL CHARACTERISTICS (FLIS)
DRILLED HOLE LOCATIONBOTH ENDS
PART NAME ASSIGNED BY CONTROLLING AGENCYROD - TIE 1/2 - 13X21.5
MATERIALSTEEL OVERALL
END ITEM IDENTIFICATIONEAV ACTUATOR
CHAMFER LENGTH13.0 INCHES NOMINAL ALL ENDS IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5236-5Interchangeable
interchangeable cross-reference
interchangeable
11900Interchangeable
interchangeable cross-reference
interchangeable
SM-B-157116Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 46872 ITEM 11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46872 ITEM 11?
46872 ITEM 11 is a ROD,STRAIGHT,HEADLESS.
What parts can replace 46872 ITEM 11?
There are 3 known substitutes for 46872 ITEM 11: 5236-5, 11900, SM-B-157116. Substitute compatibility should be verified for your specific system.
What is the NSN for 46872 ITEM 11?
46872 ITEM 11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-617-4829. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46872 ITEM 11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026