PartsTable
Technical Data Sheet
Download PDF

46809 — ELEMENT,STATIONARY

✓ Government record, cited
Lindy · ORING SEAL
PRODUCT OVERVIEW

46809: ELEMENT,STATIONARY.

The ELEMENT,STATIONARY is a Lindy industrial component. Key specifications include material: STEEL, overall_length: 2.875 INCHES NOMINAL IN, overall_diameter: 0.140 INCHES NOMINAL IN, special_features: BLANK MATERIAL IS HIGH SPEED STEEL;BRIGHT FINISH;BLANK TOLERANCE PLUS 0.0000 TO MINUS 0.0003. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-633-5087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46809
NSN: 5330-00-633-5087
NIINs: 006335087, 011871283, 016485705
FSC: 5330 — Packing and Gasket Materials
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL
overall_length2.875 INCHES NOMINAL IN
overall_diameter0.140 INCHES NOMINAL IN
special_featuresBLANK MATERIAL IS HIGH SPEED STEEL;BRIGHT FINISH;BLANK TOLERANCE PLUS 0.0000 TO MINUS 0.0003
NSN5330-00-633-5087
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 46809 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -30.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.375 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 5.002 INCHES MINIMUM AND 5.006 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.999 INCHES MINIMUM AND 4.017 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE CASE
•
MATERIAL: STEEL CORROSION RESISTING CASE
TECHNICAL CHARACTERISTICS
TEMP RATING-30.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
SEAL WIDTH0.375 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER5.002 INCHES MINIMUM AND 5.006 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER3.999 INCHES MINIMUM AND 4.017 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE CASE
MATERIALSTEEL CORROSION RESISTING CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
39526AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 46809?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46809?
46809 is a ELEMENT,STATIONARY manufactured by Lindy.
What parts can replace 46809?
There is 1 known substitute for 46809: 39526A. Substitute compatibility should be verified for your specific system.
What is the NSN for 46809?
46809 is cataloged in the U.S. Government catalog under NSN 5330-00-633-5087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46809

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.