PartsTable
Technical Data Sheet
Download PDF

4677983-0013 — CONNECTOR,FLUID,CYL

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

4677983-0013: CONNECTOR,FLUID,CYL.

The CONNECTOR,FLUID,CYL is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 0.877 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN, outside_diameter: 1.620 INCHES MINIMUM AND 1.623 INCHES MAXIMUM IN, material_thickness: 0.960 INCHES MINIMUM AND 0.965 INCHES MAXIMUM IN, outer_edge_thickness: 0.304 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-120-5376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4677983-0013
NSN: 4730-01-120-5376
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter0.877 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
outside_diameter1.620 INCHES MINIMUM AND 1.623 INCHES MAXIMUM IN
special_featuresNICKEL ALUMINUM BRONZE;ONE HOLE,0.625 IN.DIA BY 3.250 IN.DP;FOUR HOLES,0.750 IN.DP,90 DEG COUNTERSINK TO 0.400 IN.DIA,0.375 IN.FULL THD DP IN
material_thickness0.960 INCHES MINIMUM AND 0.965 INCHES MAXIMUM IN
outer_edge_thickness0.304 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
cross-sectional_shape_styleCOUNTERBORED STRAIGHT FACE
material_document_and_classificationUNABLE TO DECODE
general_characteristics_item_descriptionNICKEL COPPER ALLOY; 2.250 IN. O/A OD; 0.750 IN. MIN ID ON ONE END IN
NSN4730-01-120-5376
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 4677983-0013 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 4
522-4677983Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
34-56-7864Reference document
Same NSN cross-reference
Reference document — Secondary reference
87682-7202 ITEM 13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
522-4677983 ITEM 13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4677983-0013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4677983-0013?
4677983-0013 is a CONNECTOR,FLUID,CYL.
What parts can replace 4677983-0013?
There are 4 known substitutes for 4677983-0013: 522-4677983, 34-56-7864, 87682-7202 ITEM 13 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4677983-0013?
4677983-0013 is cataloged in the U.S. Government catalog under NSN 4730-01-120-5376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4677983-0013