PartsTable
Technical Data Sheet
Download PDF

4677382-4-67 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4677382-4-67: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include hardness_rating: 50.0 SHORE DUROMETER D MINIMUM AND 65.0 SHORE DUROMETER D MAXIMUM OVERALL, inside_diameter: 8.50 INCHES NOMINAL IN, outside_diameter: 9.50 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: V RING ADAPTERS. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-658-8592, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4677382-4-67
NSN: 5330-01-658-8592
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
hardness_rating50.0 SHORE DUROMETER D MINIMUM AND 65.0 SHORE DUROMETER D MAXIMUM OVERALL
inside_diameter8.50 INCHES NOMINAL IN
outside_diameter9.50 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyV RING ADAPTERS
NSN5330-01-658-8592
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4677382-4-67 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 9.50 INCHES NOMINAL IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER D MINIMUM AND 65.0 SHORE DUROMETER D MAXIMUM OVERALL
•
INSIDE DIAMETER: 8.50 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER9.50 INCHES NOMINAL IN
HARDNESS RATING50.0 SHORE DUROMETER D MINIMUM AND 65.0 SHORE DUROMETER D MAXIMUM OVERALL
INSIDE DIAMETER8.50 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYV RING ADAPTERS
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 3
2642-850-01-4-67Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B553-1008-22Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
596-7410342-22Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4677382-4-67?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4677382-4-67?
4677382-4-67 is a PACKING ASSEMBLY.
What parts can replace 4677382-4-67?
There are 3 known substitutes for 4677382-4-67: 2642-850-01-4-67, B553-1008-22, 596-7410342-22. Substitute compatibility should be verified for your specific system.
What is the NSN for 4677382-4-67?
4677382-4-67 is cataloged in the U.S. Government catalog under NSN 5330-01-658-8592. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4677382-4-67