PartsTable
Technical Data Sheet
Download PDF

467524 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

467524: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.328 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, material: STEEL COMP 1008 OR STEEL COMP 1010 BAND, slot_width: 0.328 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, slot_length: 0.440 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, special_features: COLOR BLUE; FURNISHED WITH TANG. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-163-9400, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
467524
NSN: 5340-01-163-9400
NIINs: 011639400, 014243516
FSC: 5340 — Hardware, Commercial
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
diameter0.328 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
materialSTEEL COMP 1008 OR STEEL COMP 1010 BAND
slot_width0.328 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
slot_length0.440 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
special_featuresCOLOR BLUE; FURNISHED WITH TANG
style_designatorMULTIPLE LOOP
tongue_hole_typeROUND, UNTHREADED AND OBLONG
surface_treatmentZINC BAND
largest_loop_width0.374 INCHES NOMINAL IN
material_thickness0.040 INCHES NOMINAL IN
smallest_loop_width0.250 INCHES NOMINAL IN
NSN5340-01-163-9400
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 467524 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LARGEST LOOP WIDTH: 0.374 INCHES NOMINAL IN
•
SMALLEST LOOP WIDTH: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
DIAMETER: 0.328 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BAND
TECHNICAL CHARACTERISTICS
LARGEST LOOP WIDTH0.374 INCHES NOMINAL IN
SMALLEST LOOP WIDTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORMULTIPLE LOOP
DIAMETER0.328 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR BLUE; FURNISHED WITH TANG
SURFACE TREATMENTZINC BAND
TONGUE HOLE TYPEROUND, UNTHREADED AND OBLONG
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.700 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
340820 ITEM 54Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 467524?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 467524?
467524 is a CLAMP,LOOP.
What parts can replace 467524?
There is 1 known substitute for 467524: 340820 ITEM 54. Substitute compatibility should be verified for your specific system.
What is the NSN for 467524?
467524 is cataloged in the U.S. Government catalog under NSN 5340-01-163-9400. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 467524