PartsTable
Technical Data Sheet
Download PDF

4674804 ITEM 15 — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

4674804 ITEM 15: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 7.5030 INCHES MINIMUM AND 7.5050 INCHES MAXIMUM IN, material: LUBRICANT LUBRICATION, corner_shape: SQUARE ALL CORNERS, surface_finish: 125.0 MICROINCHES OVERALL, outside_diameter: 8.4800 INCHES MINIMUM AND 8.4900 INCHES MAXIMUM IN, style_designator: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-076-3246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4674804 ITEM 15
NSN: 3120-01-076-3246
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter7.5030 INCHES MINIMUM AND 7.5050 INCHES MAXIMUM IN
materialLUBRICANT LUBRICATION
corner_shapeSQUARE ALL CORNERS
surface_finish125.0 MICROINCHES OVERALL
outside_diameter8.4800 INCHES MINIMUM AND 8.4900 INCHES MAXIMUM IN
style_designatorROUND
overall_thickness0.3125 INCHES NOMINAL IN
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN3120-01-076-3246
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 4674804 ITEM 15 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
CORNER SHAPE: SQUARE ALL CORNERS
•
OVERALL THICKNESS: 0.3125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND
•
DIAMETER: 7.5030 INCHES MINIMUM AND 7.5050 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 8.4800 INCHES MINIMUM AND 8.4900 INCHES MAXIMUM IN
•
MATERIAL: LUBRICANT LUBRICATION
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
CORNER SHAPESQUARE ALL CORNERS
OVERALL THICKNESS0.3125 INCHES NOMINAL IN
STYLE DESIGNATORROUND
DIAMETER7.5030 INCHES MINIMUM AND 7.5050 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER8.4800 INCHES MINIMUM AND 8.4900 INCHES MAXIMUM IN
MATERIALLUBRICANT LUBRICATION
CENTER HOLE SHAPE STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 1
518-4674804 ITEReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4674804 ITEM 15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4674804 ITEM 15?
4674804 ITEM 15 is a BEARING,WASHER,THRUST.
What parts can replace 4674804 ITEM 15?
There is 1 known substitute for 4674804 ITEM 15: 518-4674804 ITE. Substitute compatibility should be verified for your specific system.
What is the NSN for 4674804 ITEM 15?
4674804 ITEM 15 is cataloged in the U.S. Government catalog under NSN 3120-01-076-3246. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4674804 ITEM 15