PartsTable
Technical Data Sheet
46744 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Almost unlimited bandwidth at high speeds over long distances<br>- Compatible with all standard fibre optic equipment and connectors<br>- Full duplex 50/125µm type fibre<br>- Zip twin, LS0H, Multimode cable<br>- Ceramic connectors ensure low signal loss and high reliability<br>- Total immunity to electrical and electromagnetic interference (EMI)<br>- Insertion Loss: <0.3dB<br><br>The LINDY OM4 cables allows new VCSEL based hardware and old legacy LED hardware to co-exist on one system. Installing an OM4 optical fibre solution gives a simple migration path from 1Gbs to 10Gbs and the security of knowing the system will give many years of solid, secure service to your network. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-129-8694, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
46744
NSN: 5330-01-129-8694
FSC: 5330
CAGE: 81795 — ALLIANZ SWEEPER COMPANY (USA)
SPECIFICATIONS
body_width0.725 INCHES MAXIMUM IN
overall_width0.757 INCHES MAXIMUM IN
body_thickness0.317 INCHES MAXIMUM IN
overall_length1.775 INCHES MAXIMUM IN
terminal_length1.500 INCHES NOMINAL IN
special_featuresTECH ORDER 11W1-33-7-2 FIG 6
style_designatorOVAL BODY, WIRE LEADS
circuit_resonanceSERIES RESONANCE
overall_thickness0.352 INCHES MAXIMUM IN
terminal_diameter0.030 INCHES NOMINAL IN
drive_level_rating10.0 MICROWATTS MAXIMUM
mode_of_oscillationFUNDAMENTAL
NSN5330-01-129-8694
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 46744 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
DN 9532966Interchangeable
interchangeable cross-reference
interchangeable
46744Interchangeable
interchangeable cross-reference
interchangeable
6744Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 46744?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46744?
46744 is a FILTER ELEMENT,INTAKE AIR CLEANE manufactured by Lindy.
What parts can replace 46744?
There are 3 known substitutes for 46744: DN 9532966, 46744, 6744. Substitute compatibility should be verified for your specific system.
What is the NSN for 46744?
46744 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-129-8694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46744