PartsTable
Technical Data Sheet
46738 ✓ Verified by PartsTable
Lindy · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Compatible with all standard fibre optic equipment and connectors<br>- Full duplex 50/125µm type fibre<br>- Zip twin, LS0H, Multimode cable<br>- Ceramic connectors ensure low signal loss and high reliability<br>- Total immunity to electrical and electromagnetic interference (EMI)<br>- Insertion Loss: <0.3dB<br><br>The LINDY OM4 cables allows new VCSEL based hardware and old legacy LED hardware to co-exist on one system. Installing an OM4 optical fibre solution gives a simple migration path from 1Gbs to 10Gbs and the security of knowing the system will give many years of solid, secure service to your network. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-301-7665, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
46738
NSN: 3110-01-301-7665
FSC: 3110
CAGE: 24235 — WILLIAMS INTERNATIONAL CO., L.L.C. (USA)
SPECIFICATIONS
Part Number46738
ManufacturerLindy
NSN3110-01-301-7665
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 46738 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL COMP E52100 OVERALL
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
BORE DIAMETER: 0.6691 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN
LOAD DIRECTION: RADIAL
OVERALL OUTSIDE DIAMETER: 1.1808 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN
SURFACE FINISH: GROUND
INTERNAL CLEARANCE: 0.0007 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP E52100 OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
BORE DIAMETER0.6691 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
OVERALL OUTSIDE DIAMETER1.1808 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN
SURFACE FINISHGROUND
INTERNAL CLEARANCE0.0007 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL IN
BORE SHAPESTRAIGHT
OVERALL WIDTH0.2676 INCHES MINIMUM AND 0.2726 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
23410Interchangeable
interchangeable cross-reference
interchangeable
43038-2PC96Interchangeable
interchangeable cross-reference
interchangeable
50373-11PC101Interchangeable
interchangeable cross-reference
interchangeable
48200-11PC101Interchangeable
interchangeable cross-reference
interchangeable
806000Interchangeable
interchangeable cross-reference
interchangeable
915769Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 46738?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46738?
46738 is a LEAD,IGNITION,ENGINE manufactured by Lindy.
What parts can replace 46738?
There are 19 known substitutes for 46738: 23410, 43038-2PC96, 50373-11PC101 and 16 more. Substitute compatibility should be verified for your specific system.
Is 46738 still available?
46738 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46738