PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 466SP
466SP ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.188 INCHES NOMINAL IN, diameter: 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT FILLISTER, chamfer_length: 0.016 INCHES NOMINAL IN, hardness_rating: 40.0 ROCKWELL C MINIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-692-6101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
466SP
NSN: 5315-00-692-6101
FSC: 5315
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
height0.188 INCHES NOMINAL IN
diameter0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT FILLISTER
chamfer_length0.016 INCHES NOMINAL IN
hardness_rating40.0 ROCKWELL C MINIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.370 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
under_head_length0.594 INCHES NOMINAL IN
NSN5315-00-692-6101
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 466SP · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.016 INCHES NOMINAL IN
•
DIAMETER: 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
•
PIN HEAD DIAMETER: 0.370 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
HEIGHT: 0.188 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM OVERALL
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CHAMFER LENGTH0.016 INCHES NOMINAL IN
DIAMETER0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
PIN HEAD DIAMETER0.370 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
HEIGHT0.188 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HARDNESS RATING40.0 ROCKWELL C MINIMUM OVERALL
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
HEAD STYLEFLAT FILLISTER
UNDER HEAD LENGTH0.594 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
914379Interchangeable
interchangeable cross-reference
interchangeable
SAE-J513Interchangeable
interchangeable cross-reference
interchangeable
0914379-3Interchangeable
interchangeable cross-reference
interchangeable
LT-52-4Interchangeable
interchangeable cross-reference
interchangeable
576T3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 466SP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 466SP?
466SP is a PIN,STRAIGHT,HEADED.
What parts can replace 466SP?
There are 5 known substitutes for 466SP: 914379, SAE-J513, 0914379-3 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 466SP?
466SP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-692-6101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 466SP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026