PartsTable
Technical Data Sheet
Download PDF

46613-4 — WAVEGUIDE ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

46613-4: WAVEGUIDE ASSEMBLY.

The WAVEGUIDE ASSEMBLY is a the manufacturer industrial component. Key specifications include material: COPPER ALL VANE, flexibility: FLEXIBLE SINGLE TUBING SEGMENT, flange_depth: 0.340 INCHES NOMINAL ALL FLANGES IN, flange_style: CONTACT TYPE ALL FLANGES, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-984-4409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
46613-4
NSN: 5340-00-984-4409
NIINs: 009844409, 012647410
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialCOPPER ALL VANE
flexibilityFLEXIBLE SINGLE TUBING SEGMENT
flange_depth0.340 INCHES NOMINAL ALL FLANGES IN
flange_styleCONTACT TYPE ALL FLANGES
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.625 INCHES NOMINAL IN
flange_quantity2
first_leg_length0.835 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width0.625 INCHES NOMINAL IN
style_designatorSTRAIGHT TYPE
NSN5340-00-984-4409
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 46613-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.310 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.235 INCHES NOMINAL IN
•
FSC APPLICATION DATA: ENGINE,ACFT,TURBO-FAN
•
FIRST LEG HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.344 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.310 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.235 INCHES NOMINAL IN
FSC APPLICATION DATAENGINE,ACFT,TURBO-FAN
FIRST LEG HOLE DIAMETER0.219 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.344 INCHES NOMINAL IN
SECOND LEG WIDTH0.625 INCHES NOMINAL IN
SECOND LEG LENGTH2.105 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 46613-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 46613-4?
46613-4 is a WAVEGUIDE ASSEMBLY.
What is the NSN for 46613-4?
46613-4 is cataloged in the U.S. Government catalog under NSN 5340-00-984-4409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 46613-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.