PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4660344-5
4660344-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.500 INCHES NOMINAL IN, bolt_circle_diameter: 5.500 INCHES NOMINAL IN, outside_corner_radius: 0.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.094 INCHES NOMINAL IN, cross-sectional_shape_style: METAL AND METALLIC MATERIALS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-423-7572, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4660344-5
NSN: 5330-00-423-7572
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
hole_diameter0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.500 INCHES NOMINAL IN
bolt_circle_diameter5.500 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.094 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND METALLIC MATERIALS
NSN5330-00-423-7572
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4660344-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND METALLIC MATERIALS
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT CIRCLE DIAMETER: 5.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEMETAL AND METALLIC MATERIALS
OVERALL WIDTH6.500 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
HOLE DIAMETER0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT CIRCLE DIAMETER5.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
14515Interchangeable
interchangeable cross-reference
interchangeable
NFES 0259Interchangeable
interchangeable cross-reference
interchangeable
5100-380Interchangeable
interchangeable cross-reference
interchangeable
659-1Interchangeable
interchangeable cross-reference
interchangeable
169BInterchangeable
interchangeable cross-reference
interchangeable
2070Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4660344-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4660344-5?
4660344-5 is a GASKET.
What parts can replace 4660344-5?
There are 12 known substitutes for 4660344-5: 14515, NFES 0259, 5100-380 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4660344-5?
4660344-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-423-7572. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4660344-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026